Home Resolve Carpet LIVING ROOM Resolve Laundry LAUNDRY ROOM Resolve It! STAIN SOLVER Use IT! PRODUCTS Go Green Save It! Coupons Contact
Carpet and Upholstery Cleaners




HINTS FROM THE EXPERTS:
check For best results, SHAKE bottle vigorously to break up product before dispensing for best area coverage and to maximize deep cleaning of carpet.
check Let wet soils dry before cleaning.
check Cleans up to an 8 ft x 10 ft localized area on all carpet types including stain-resistant, except special carpets like antique or oriental rugs.
check Allow longer drying time in humid weather, or on deep pile carpet. If powder does not vacuum up completely, let stand until carpet feels dry to touch, then re-vacuum.
check For stubborn pet stains, try RESOLVE® Pet Stain Removers also with ODOR STOP®.
x Not recommended for use with any vacuum cleaner that has a water filter or water tank.


 
Our Home Our Planet
RESOLVE bottles are made out of 25% post-consumer recycled plastic.

The formula contains no phosphates.
 

CARPET & UPHOLSTERY Cleaner
<< BACK TO ALL CARPET & UPHOLSTERY CLEANERS

image of RESOLVE® Pet Stain INSTANT ERASER™ with ODOR STOP® Technology
RESOLVE® Pet Deep Clean Powder with ODOR STOP® Technology

RESOLVE® Pet Deep Clean Powder lifts & removes tough ground in dirt, messes & odors left behind by pets.

  • Deep Cleans to lift & remove ground-in dirt,
    pet messes & odors
  • Patented ODOR STOP® Technology:
    • Eliminates Pet Odors
    • Freshens with a light, clean scent
    • Discourages Pet Resoiling


Available in a 18 oz canister.
Found in the cleaning supply section.


Works great on these stains: Ground-in Dirt, Pet Messes

*For stubborn pet stains, try RESOLVE® Pet Stain Carpet Cleaner in a trigger spray or RESOLVE® Pet Stain Instant Eraser™ aerosol.

DIRECTIONS:

Carpet is left safe for pets and kids when RESOLVE® Pet Deep Clean Powder with ODOR STOP® Technology is used as directed.

 

step 1 SHAKE
 1. Shake container vigorously before each use to maximize product coverage.
step 2. SPRINKLE
 2. Sprinkle powder on generously to thoroughly cover soiled areas. Apply to no more than a 2 ft. x 5 ft. area at a time to prevent moist powder from drying out.
step 3. BRUSH
 3. Using a soft bristle brush, immediately brush the powder thoroughly into carpet. Brush until all soil disappears. IMPORTANT: While cleaning, if soil/stains remain, apply more powder and continue brushing until soiled areas look as clean as rest of carpet.
step 4 VACUUM
 4.


5.		 Wait at least 20 minutes for powder to dry, then vacuum. Use an empty vacuum bag for best results.

To store, replace cap tightly. After use, rinse brush and allow to dry.